lfadgyas
01-08 07:25 PM
http://immigrationvoice.org/forum/forum5-all-other-green-card-issues/16244-unemployment-benefits-on-ead-3.html
pappu
08-14 02:36 PM
Can people convert LC pending in BEC to PERM? If So, how safe it is and how much time it takes totally.
evaluate your pros and cons based on your own unique situations.
the BEC uses old generous rules to process applications. thus chances of success are better
perm is faster and thus you can get 140 done sooner to get 3 year extension instead of 1 year.
you can transfer priority date via perm. however if your case in perm is denied, you get into problem. you cannot then go back to BEC application.
bec should process cases by mid next year. there is lot of pressure on them. till now their performance has not been all that good and they are getting lot of flak for it.
in the current retrogression scenario, even if you get perm and 140 approved, you will still be in the back of the line at 485.
thus priority dates are more important. make sure any decision you take maintains your old date.
evaluate your pros and cons based on your own unique situations.
the BEC uses old generous rules to process applications. thus chances of success are better
perm is faster and thus you can get 140 done sooner to get 3 year extension instead of 1 year.
you can transfer priority date via perm. however if your case in perm is denied, you get into problem. you cannot then go back to BEC application.
bec should process cases by mid next year. there is lot of pressure on them. till now their performance has not been all that good and they are getting lot of flak for it.
in the current retrogression scenario, even if you get perm and 140 approved, you will still be in the back of the line at 485.
thus priority dates are more important. make sure any decision you take maintains your old date.
IneedAllGreen
02-04 12:43 PM
:confused: Does anyone have multiple RFE for I-140? :confused:
I am kind of curious to know if there is anyone like me in same boat. I got 2 RFE (off course one after another once we answer first one) for my I-140 in year 2008. First RFE I got it regarding ability to pay which we answer in January 2008. I got another RFE in August 2008. Second RFE was kind of mix of ability to pay and education validation. For second RFE they ask for university transcript, all experience letter matching with job description from labor certificate, last year's W2 and company's last year bank statement(year 2007). It was one of the huge list I had seen from USCIS.
Long story short what the hell are they doing with all documents they are asking from us? Its being 3 and half months we have answer 2nd RFE but there is no single response from NSC except they have received the documents and processing has resumed. My I-140 is stuck at NSC from January 2007. How long do I have to wait to get my I-140 approval?:mad:
How do I can contact NSC to know what the hell are they doing with my I-140? Guys share your experience so we all can prevail this another backlog mess.
I am kind of curious to know if there is anyone like me in same boat. I got 2 RFE (off course one after another once we answer first one) for my I-140 in year 2008. First RFE I got it regarding ability to pay which we answer in January 2008. I got another RFE in August 2008. Second RFE was kind of mix of ability to pay and education validation. For second RFE they ask for university transcript, all experience letter matching with job description from labor certificate, last year's W2 and company's last year bank statement(year 2007). It was one of the huge list I had seen from USCIS.
Long story short what the hell are they doing with all documents they are asking from us? Its being 3 and half months we have answer 2nd RFE but there is no single response from NSC except they have received the documents and processing has resumed. My I-140 is stuck at NSC from January 2007. How long do I have to wait to get my I-140 approval?:mad:
How do I can contact NSC to know what the hell are they doing with my I-140? Guys share your experience so we all can prevail this another backlog mess.
dionysus
03-17 01:59 PM
Hi, continuing the same line of discussion, I have a slightly different question. Assuming the insurance company does not reimburse us for 485 medical exams, then can we atleast seek tax rebate on this expenditure? In other words, are the medical expenses incurred for 485 filing deductible at the time of tax filing?
more...
some_guy
07-17 05:37 PM
Great news...... Keep going IV
va_il
02-13 08:57 PM
Thanks a lot for the information. Since I had sent my renewal application via courier, I never got any pick up slip. I have paid $15 for mailing service. What I am worried is that even if I drive 5 hours to pick up, if they haven't processed my application (its close to 4 weeks now since I have applied), I will run out of options. On the website they claim that they will process in 5 business days. I must have tried close to 5 different phone numbers multiples times for past week or so. I have also emailed and faxed my query multiple times. Same result - No response at all. I just don't get how work is done at the embassy.
I have no idea about all these complaints. I gave my passport for renewal on last thursday and i picked up new one on friday. Never heard of delays on this issue.
I have no idea about all these complaints. I gave my passport for renewal on last thursday and i picked up new one on friday. Never heard of delays on this issue.
more...
agiridhar
01-28 02:07 PM
from dallas.
Gravitation
06-29 01:12 PM
My docs and signed applications reached attorney last Friday. Paralegal seems to be working on it as he keeps sending questions by email. However, when I asked the forms might be mailed by June 29th, he didn't reply. My feeling -by the questions asked- is that my form are complete. I'm hoping he'll mail it latest by first week of July.
more...
Dhundhun
06-08 01:36 PM
Dhundhun,
Thank you for your earlier help. I have one more question. My I485 with approved I140 EB2 catagory PD June 2006 is pending and God knows for how many days. My job as Mechanical Engineer is stable and employer is willing to help me. I have a PhD in Engineering with about 30 years experience in industry and teaching. However, because of industry work I do not have many publications. I am a Fellow of IEI and a recognised PhD guide in Indian University, can get good recommendations too. Can I try for EB1 in some catagory?
Thanks again
This site gives broad description of EB1 and its classification:
http://www.visaus.us/pages/greencard-EB1.htm
This is speciality area for lawyers: Can they put in EB-1(b) catagory, which is dependant on research/publication or EB-1(c) if on very senior management?
I think enough publications are required for EB-1(b), my couple of my friends with PhD could not get enough evidence to be placed in EB-1(b).
Thank you for your earlier help. I have one more question. My I485 with approved I140 EB2 catagory PD June 2006 is pending and God knows for how many days. My job as Mechanical Engineer is stable and employer is willing to help me. I have a PhD in Engineering with about 30 years experience in industry and teaching. However, because of industry work I do not have many publications. I am a Fellow of IEI and a recognised PhD guide in Indian University, can get good recommendations too. Can I try for EB1 in some catagory?
Thanks again
This site gives broad description of EB1 and its classification:
http://www.visaus.us/pages/greencard-EB1.htm
This is speciality area for lawyers: Can they put in EB-1(b) catagory, which is dependant on research/publication or EB-1(c) if on very senior management?
I think enough publications are required for EB-1(b), my couple of my friends with PhD could not get enough evidence to be placed in EB-1(b).
H1B2GC
09-30 07:24 PM
Option 1:
You could write a letter to USCIS to let them know that this attorney who filed your I-485 does not represent you anymore and future correspondence be addressed to you directly and also to revoke the G-28. You will not get any letter from USCIS confirming that your request was processed.
Option 2:
You could hire a new attorney to represent you. In that case he would file a new G-28, the USCIS does send a letter confirming that they accepted your new attorney representation. Meanwhile, until this happens, all the correspondence will go to the old attorney who could potentially screw up your case.
If you are lucky enough and don't get a RFE till the new G-28 is accepted, You are SAFE. Also, any attorney you hire will charge you the FULL fees for I-485 filing that will be at least $3000.00 plus additional $5000.00 (If your case gets complicated). My best bet for you is to use option 1 and save your hard earned $. As you'll be taking your chances anyways.
You should urge LIVE to start up an emergency rescue service (similar to what AAA does), i.e., to get an attorney who would help taking up cases for members only who suffer from unscrupulous attorneys for free and charge a low monthly membership fees till one gets the green card. I hope someone from LIVE is reading this post?
You could write a letter to USCIS to let them know that this attorney who filed your I-485 does not represent you anymore and future correspondence be addressed to you directly and also to revoke the G-28. You will not get any letter from USCIS confirming that your request was processed.
Option 2:
You could hire a new attorney to represent you. In that case he would file a new G-28, the USCIS does send a letter confirming that they accepted your new attorney representation. Meanwhile, until this happens, all the correspondence will go to the old attorney who could potentially screw up your case.
If you are lucky enough and don't get a RFE till the new G-28 is accepted, You are SAFE. Also, any attorney you hire will charge you the FULL fees for I-485 filing that will be at least $3000.00 plus additional $5000.00 (If your case gets complicated). My best bet for you is to use option 1 and save your hard earned $. As you'll be taking your chances anyways.
You should urge LIVE to start up an emergency rescue service (similar to what AAA does), i.e., to get an attorney who would help taking up cases for members only who suffer from unscrupulous attorneys for free and charge a low monthly membership fees till one gets the green card. I hope someone from LIVE is reading this post?
more...
ComicDom1
December 21st, 2007, 01:11 AM
First I want to say hello to everyone because I have not been on this site for a while. Second, I want to wish everyone a happy holiday season.
Recently, I have been taking a good hard look at the Olympus E-3. I came to Canon Digital in the early days of the 1D after shooting many different digital cameras including Olympus.
I was well pleased using my E-10, E100RS, E-20, and UZI but when I got the 1D in my hands it was as if a whole new world opened up for me again.
Like many others, I have been following the development of Olympus Camera's. Many of us switched to other brands because we grew tired of waiting for Olympus to produce a DSLR that might be able to compete with the offering from Nikon or Canon. The move to producing a full frame 4/3's sensor was interesting as well. When Olympus finally did release the E-1, it offered a great build including a splash proof body, and some very high quality glass. Unfortunately it lacked in a few area's and although interesting, unless you shot at lower ISO, it was not a camera for people who liked to shoot in low light and sporting events.
I realize, that not everyone has the same requirements for a camera. There are many users the E-1 body worked for. I finally picked one up after the prices fell to a very low point, and I could not resist the deal. I have found the image quality very good if you stay within the limits of the camera.
Finally the E-3 arrived in November and Olympus had made many upgrades in this body. I was very curious as to how competitive IS built in the body of the camera would work. I was also interested in the speed and tracking of the new auto focus system, and if Olympus had really improved on the noise levels of the camera at Higher ISOs. Although many in the Olympus SLR forum at DPR will claim that Noise is no problem at High ISO, my experiences with the camera told me different.
I do have to say, I found the E-3 very well built. The viewfinder is very bright. With the Grip attached, the E-3 felt very similar in my hands to my Canon 1D and 1DMKII.
One of the promises that Olympus made was that the 4/3 system was going to provide us with a smaller lighter Camera body with smaller lenses. While this might be true for some of their mid range cameras, it is certainly not true for the E-3 or E-1 with the grip attached. When sitting on the floor next to my 1D and 1DMKII bodies, I did not find much difference in their size. Lenses might be another story but yesterday, I compared the Olympus 35-100mm to the 70-200 2.8 IS lens and found that the Olympus lens was actually slightly heavier. Unfortunately Olympus has not produced any faster primes like the 85 1.8 of Canon. You really do not have good comparisons of lenses because most of what Olympus produces are variable zooms with the exception of a couple of lenses. Olympus also seems to advertise that they cover the focal length of lenses better than any other manufacturer. Since they include lenses from Sigma and Lecia/pany in this claim, I find difficulty in accepting that. Certainly if I have to consider a lens, I would prefer it was from the maker of my camera, but thats just a personal preference based on past experience.
I do have to give Kudo's to Olympus for improving both the frames per second, as well as the Auto Focus tracking and speed. I found the E-3 will track pretty well in a poorly lit gym. The E-3 also appears to write to the CF card pretty quickly. Why they included a slot for an XD card is beyond me. They would have been much better off to include a slot for the SD cards because of their high capacity.
I also qualified to be an Olympus Global Professional member. What this means is that I can get equipment to evaluate just like what CPS offers. Olympus goes one step further than Canon here because they will even loan you equipment while yours is in repair. So I had them send me a few items to try out. Some of the items I received was the EC-14 tele-converter, 150mm F 2.0, 50mm F 2.0 Macro, as well as a ring flash, and Fl-50R to evaluate. I think I need more time with the FL-50R and ring flash to know how I feel about them.
One of the reasons I wanted the 150mm F 2.0 (effective focal length of 300mm on the E-3) to test is because I wanted to see how it compared in weight and Image Quality to my 300mm 2.8L lens. I also wanted to know how well the E3 in body IS would work with it. Unfortunately I got side tracked because I noticed that my E-3 images contained quite a bit of noise from the images I shot and got consumed looking at that. I can tell you that the 150 and E-3 with grip combination felt very unbalanced in my hands compared to the Canon lens. The 150mm weights 3.4lbs but of course has the effective focal length of 300mm on the E-3 because of the sensor size. If we wanted to compare apples to apples, 300mm to 300mm or actual focal length, we would find that the Olympus 300mm weighs in at a hefty 7.2 lbs compared to Canon's 300mm 2.8 IS lens which is 5.6 lbs. Also the Olympus glass is much more expensive as well.
The problem here is that we are paying more for effective focal length just because the camera sensor is different. So in my view, we are paying more for less in the physical sense.
I mounted the 150mm on a monopod as well. Again compared to the 1D with the 300mm, even though the E-3 combination was lighter, it was not balanced as well and was more difficult for me to steady. I do attribute some of this with me being more experienced with the Canon Gear. There is another issue that concerned me here. I did not feel that the Tripod collar of the 150mm lens was made as heavy or as well as the Canon version.
I am currently going though several hundred exposures I have taken with various focal lengths of Olympus lenses. Since I felt my body has some issues because of noise, yesterday I returned it, the grip, and the 12-60 SWD lens to my vendor. I am waiting now for Olympus to send me another body to try out, so I can find out if it was me or the camera at fault. In the mean time, it seems that my findings are similiar to what Phil found in his DPR review of the new Sony that included the E-3 as well as the D300 and 40D.
In closing, I need to say that this all came about because not only was I interested in the development and capability of the E-3, there were also the noted problems of the 1DMKIII. At this point, I think my 1DMKII will still do nicely for sports. Since I pretty much own the Canon lenses I need, I am considering the 5D, but I want to also give the Olympus E-3 a fair chance, so I am going to wait to see if Olympus follows through on their promise to me.
I also am aware that there is a possibility that a 5D replacement may be announced at PMA next month. Of course I am basically interested in the best image quality, I do not know if I will wait for the replacement. Since the 5D has large photosites, I would think that the replacement would have more pixels so the image quality may be affected.
Thanks for Reading,
Jason
ComicDom1@aol.com
Recently, I have been taking a good hard look at the Olympus E-3. I came to Canon Digital in the early days of the 1D after shooting many different digital cameras including Olympus.
I was well pleased using my E-10, E100RS, E-20, and UZI but when I got the 1D in my hands it was as if a whole new world opened up for me again.
Like many others, I have been following the development of Olympus Camera's. Many of us switched to other brands because we grew tired of waiting for Olympus to produce a DSLR that might be able to compete with the offering from Nikon or Canon. The move to producing a full frame 4/3's sensor was interesting as well. When Olympus finally did release the E-1, it offered a great build including a splash proof body, and some very high quality glass. Unfortunately it lacked in a few area's and although interesting, unless you shot at lower ISO, it was not a camera for people who liked to shoot in low light and sporting events.
I realize, that not everyone has the same requirements for a camera. There are many users the E-1 body worked for. I finally picked one up after the prices fell to a very low point, and I could not resist the deal. I have found the image quality very good if you stay within the limits of the camera.
Finally the E-3 arrived in November and Olympus had made many upgrades in this body. I was very curious as to how competitive IS built in the body of the camera would work. I was also interested in the speed and tracking of the new auto focus system, and if Olympus had really improved on the noise levels of the camera at Higher ISOs. Although many in the Olympus SLR forum at DPR will claim that Noise is no problem at High ISO, my experiences with the camera told me different.
I do have to say, I found the E-3 very well built. The viewfinder is very bright. With the Grip attached, the E-3 felt very similar in my hands to my Canon 1D and 1DMKII.
One of the promises that Olympus made was that the 4/3 system was going to provide us with a smaller lighter Camera body with smaller lenses. While this might be true for some of their mid range cameras, it is certainly not true for the E-3 or E-1 with the grip attached. When sitting on the floor next to my 1D and 1DMKII bodies, I did not find much difference in their size. Lenses might be another story but yesterday, I compared the Olympus 35-100mm to the 70-200 2.8 IS lens and found that the Olympus lens was actually slightly heavier. Unfortunately Olympus has not produced any faster primes like the 85 1.8 of Canon. You really do not have good comparisons of lenses because most of what Olympus produces are variable zooms with the exception of a couple of lenses. Olympus also seems to advertise that they cover the focal length of lenses better than any other manufacturer. Since they include lenses from Sigma and Lecia/pany in this claim, I find difficulty in accepting that. Certainly if I have to consider a lens, I would prefer it was from the maker of my camera, but thats just a personal preference based on past experience.
I do have to give Kudo's to Olympus for improving both the frames per second, as well as the Auto Focus tracking and speed. I found the E-3 will track pretty well in a poorly lit gym. The E-3 also appears to write to the CF card pretty quickly. Why they included a slot for an XD card is beyond me. They would have been much better off to include a slot for the SD cards because of their high capacity.
I also qualified to be an Olympus Global Professional member. What this means is that I can get equipment to evaluate just like what CPS offers. Olympus goes one step further than Canon here because they will even loan you equipment while yours is in repair. So I had them send me a few items to try out. Some of the items I received was the EC-14 tele-converter, 150mm F 2.0, 50mm F 2.0 Macro, as well as a ring flash, and Fl-50R to evaluate. I think I need more time with the FL-50R and ring flash to know how I feel about them.
One of the reasons I wanted the 150mm F 2.0 (effective focal length of 300mm on the E-3) to test is because I wanted to see how it compared in weight and Image Quality to my 300mm 2.8L lens. I also wanted to know how well the E3 in body IS would work with it. Unfortunately I got side tracked because I noticed that my E-3 images contained quite a bit of noise from the images I shot and got consumed looking at that. I can tell you that the 150 and E-3 with grip combination felt very unbalanced in my hands compared to the Canon lens. The 150mm weights 3.4lbs but of course has the effective focal length of 300mm on the E-3 because of the sensor size. If we wanted to compare apples to apples, 300mm to 300mm or actual focal length, we would find that the Olympus 300mm weighs in at a hefty 7.2 lbs compared to Canon's 300mm 2.8 IS lens which is 5.6 lbs. Also the Olympus glass is much more expensive as well.
The problem here is that we are paying more for effective focal length just because the camera sensor is different. So in my view, we are paying more for less in the physical sense.
I mounted the 150mm on a monopod as well. Again compared to the 1D with the 300mm, even though the E-3 combination was lighter, it was not balanced as well and was more difficult for me to steady. I do attribute some of this with me being more experienced with the Canon Gear. There is another issue that concerned me here. I did not feel that the Tripod collar of the 150mm lens was made as heavy or as well as the Canon version.
I am currently going though several hundred exposures I have taken with various focal lengths of Olympus lenses. Since I felt my body has some issues because of noise, yesterday I returned it, the grip, and the 12-60 SWD lens to my vendor. I am waiting now for Olympus to send me another body to try out, so I can find out if it was me or the camera at fault. In the mean time, it seems that my findings are similiar to what Phil found in his DPR review of the new Sony that included the E-3 as well as the D300 and 40D.
In closing, I need to say that this all came about because not only was I interested in the development and capability of the E-3, there were also the noted problems of the 1DMKIII. At this point, I think my 1DMKII will still do nicely for sports. Since I pretty much own the Canon lenses I need, I am considering the 5D, but I want to also give the Olympus E-3 a fair chance, so I am going to wait to see if Olympus follows through on their promise to me.
I also am aware that there is a possibility that a 5D replacement may be announced at PMA next month. Of course I am basically interested in the best image quality, I do not know if I will wait for the replacement. Since the 5D has large photosites, I would think that the replacement would have more pixels so the image quality may be affected.
Thanks for Reading,
Jason
ComicDom1@aol.com
cool_guy_onnet1
02-12 08:41 AM
No FP Yet, July 22nd Filer. I tried CSR # few times and finally got hold of someone who was kind -enough.
According to her, there are LOT OF PEOPLE in the same boat and she recieves this phone call more than any other queries.
She said, all she can do is to request Service center for FP status but here is the glitch, Request from CSR to Service Center takes 90 days to process and count another 90 days for the response to be read by CSR and issue a new FP.
Again, she kept saying that these are just numbers from top of her head and nothing is written on stone.
Hope this helps-
According to her, there are LOT OF PEOPLE in the same boat and she recieves this phone call more than any other queries.
She said, all she can do is to request Service center for FP status but here is the glitch, Request from CSR to Service Center takes 90 days to process and count another 90 days for the response to be read by CSR and issue a new FP.
Again, she kept saying that these are just numbers from top of her head and nothing is written on stone.
Hope this helps-
more...
buddyinsd
01-04 12:46 PM
LOL--- Proposing a new name for this website: IndianImmigrationVoice.org which would be more appropriate as 99% of ppl posting on this website talks about US immigration only from an Indian point of view --- LOL
rajmehrotra
10-16 01:57 PM
B-1 is a visitor's visa with no immigration intent. H1-B is dual intent. This needs to be figured out on a case-ta-case basis by an experienced attorney.
more...
Steve Mitchell
March 20th, 2004, 02:50 PM
Here's an "almost great one....doggone ref was in the way. That's the blur at the bottom left.
http://www.dphoto.us/forumphotos/data/543/1maskedman.jpg
http://www.dphoto.us/forumphotos/data/543/1maskedman.jpg
Ann Ruben
10-24 12:33 PM
Hi PVGanesh,
Establishing that one has had "five years of progressively responsible experience" is really more of an art than a science. Small details in wording or in context can sometimes be critical in painting an overall picture.
Remember that the USCIS adjudicator is not likely to be as tech savy as you are. While you may know that WXY technology is the same as, or includes XYZ technology, don't assume that the adjudicator will. Make sure everything is explained and documeted in easily understood layman's terms.
Similarly, if you worked for a small firm as a "Senior Systems Analyst" and then moved to a more responsible/demandining position in a larger firm where your title was "Systems Analyst", provide a clear and well documented explanation as to why the move represents represents career progress despite the lesser job title.
Whether or not to include your Certificates is a judgment call that can only be made after reviewing all of the experience documents in relation to the specific PERM requirements.
Hope this helps,
Ann
Establishing that one has had "five years of progressively responsible experience" is really more of an art than a science. Small details in wording or in context can sometimes be critical in painting an overall picture.
Remember that the USCIS adjudicator is not likely to be as tech savy as you are. While you may know that WXY technology is the same as, or includes XYZ technology, don't assume that the adjudicator will. Make sure everything is explained and documeted in easily understood layman's terms.
Similarly, if you worked for a small firm as a "Senior Systems Analyst" and then moved to a more responsible/demandining position in a larger firm where your title was "Systems Analyst", provide a clear and well documented explanation as to why the move represents represents career progress despite the lesser job title.
Whether or not to include your Certificates is a judgment call that can only be made after reviewing all of the experience documents in relation to the specific PERM requirements.
Hope this helps,
Ann
more...
guesswho
03-14 06:19 PM
I was offered a ticket to India without me asking them (big american corp). But since I was not going back and found another job within a short time, it was of no use to me. They will usually buy a ticket for you, won't give you money directly.
u r kidding - u think these blood suckers will sponser a ticket after u leave them - he heee. AFAIK, even American companies won't bother after u get layed off
u r kidding - u think these blood suckers will sponser a ticket after u leave them - he heee. AFAIK, even American companies won't bother after u get layed off
gc_relief
04-27 03:09 PM
Guys..I'm sorry ..I'm mixing up things,,Here are the accurate details..
Labour Priority date is Nov'20 2007
My I-140 receipt date is Feb'20 2008..
My I-140 Approve date is Sep'24 2008
My 6 years H-1 will be completed by Jan'2010..but still my H-1 was denied..
Labour Priority date is Nov'20 2007
My I-140 receipt date is Feb'20 2008..
My I-140 Approve date is Sep'24 2008
My 6 years H-1 will be completed by Jan'2010..but still my H-1 was denied..
24fps
02-23 11:05 PM
hmmn, i am seeing a HUGE jump in H1b cancellations in this forum, maybe there should be a separate thread dedicated to the cancellations so we can deduce some pattern or trend.
jonty_11
12-26 11:44 AM
Just allowing filing of I-485 while You are retrogressed, is a boon, so u can get EAD and are allowed to change Jobs in the Same profession
HRPRO
02-22 02:10 PM
snathan - How different is different enough for USCIS/DOL to be okay with it? Would the num of years of experience be helpful if it was different.
I guess I am trying to figure out if I should let go of this position and wait for another one to come around if it's the current one is not worth pursuing due to potential issues during I140 stage.
Thanks
One more thing to take ino consideration is during the audit, along with your HR department DoL will review similar jobs within your organisation and check the requirements for those jobs. They will have to be similar, else you will have an issue.
I guess I am trying to figure out if I should let go of this position and wait for another one to come around if it's the current one is not worth pursuing due to potential issues during I140 stage.
Thanks
One more thing to take ino consideration is during the audit, along with your HR department DoL will review similar jobs within your organisation and check the requirements for those jobs. They will have to be similar, else you will have an issue.
No comments:
Post a Comment